View U7001BG_277574.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

U7001BG
CT2 Front End IC
Description
U7001BG is a monolithic GaAs transmit/ receive front end with power amplifier, low noise amplifier and antenna switch. It is specially designed for operation in CT2 band and suitable for a frequency range of 839 MHz to 952 MHz with external matching. Electrostatic sensitive device. Observe precautions for handling.
Features
D D D D D D D
Low supply voltage 3.6 V typical (min. 2.7 V) High power added efficiency (typ. 40%) Low power consumption in receive mode Power down control pin for low noise amplifier Gain control of power amplifier Low noise amplifier Optional high output power 50 mW @ 5 V supply voltage
Benefits
D Extended talk time due to low power consumption and
high PAE
D Few external components and very small package
save space
Block Diagram
PA Ctrl 12 VDD (PA) PA Out 14 16 17 SW TX 18 SW Ctrl 2
PA In
8
PA
VDD (LNA /SW) LNA Ctrl LNA Out
7 3 6 LNA
Switch
20
SW Ant
4
94 8824
1 SW RX
5,9,10,11,13,15,19 GND
LNA In
Figure 1. Block diagram
Ordering Information
Extended Type Number U7001BG-BFS U7001BG-BFSG3 Package SSO20 SSO20 Remarks Tube Taped and reeled
Rev. A4, 19-May-99
1 (15)
AAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA
Absolute Maximum Ratings
Supply voltages Input voltages Control voltages Channel temperature Storage-temperature range
Figure 2. Pinning SSO20
AAAAAAAAAA A A AAAAAAAAAAAAAAAA AA AAAAAAAAAA A A AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AAAAAAA AAAAAAAAAAAAAAAA AA A AAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAA AA AAAAAAAAAA A AA AA AAAAAAAAAAAAAAAA AAAAAAA AAAAAAA A AA AAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAA AAAAAAAAA A AA AA AAAAAAAAAAAAAAAA AAAAAAA A AAAAAAAAAAAAAAAA AAAAAAAAA A A A AAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAA AA AAAAAAAAAA A AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAA AAAAAAA AAAAAAAAAAAAAAAA AA A AAAAAAAAAAAAAAAA AAAAAAA A
5,9,10, 11,13 15,19 6 Pin 1 20 18 17 16 14 12 8 7 4 3 2
VDD2(PA) PA power supply voltage 2 VDD1(PA) PA power supply voltage 1 VDD LNA & Switch power supply (LNA/SW) voltage
Operating Range
Thermal Resistance
Pin Description
U7001BG
2 (15) Parameters Supply voltages Pins 7, 14 and 16 Ambient-temperature range Channel ambient
VDD (LNA/SW) LNA Out LNA Ctrl SW RX SW Ctrl LNA In GND GND PA In GND 10 8 7 6 5 4 3 2 1 9
Parameters SSO20
Parameters Pins 7, 14 and 16 Pins 4, 8, 18 and 20 Pins 2, 3 and 12
94 8825
12
13 GND
14
15 GND
16 VDD2 (PA)
17
18 SW TX
19
20
11 GND
PA Ctrl
VDD1 (PA)
PA Out
GND
SW Ant
Symbol VDD Tamb
Symbol Rthch
Symbol VDD Vi VC Tch Tstg
LNA Ctrl LNA control input
LNA Out
SW Ctrl
SW Ant
LNA In
Symbol SW RX
SW TX
PA Ctrl
PA Out
PA In
GND
Value +7 0 to VDD 0 to VDD 125 - 40 to + 125
Value 2.7 to 5.25 - 40 to + 85
Switch antenna output
Switch TX input
PA output
PA control input
Power amplifier input
LNA output
Ground
Low noise amplifier input
Switch control input
Function Switch RX output
Value 140
Rev. A4, 19-May-99 Unit K/W Unit V C Unit V V V C C
AAAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA AA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Test conditions (unless otherwise specified); VDD = 2.9 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W; fRF = 866 MHz Test Conditions / Pins Pin 7 @ VDD = 2.7 V, Pin 7 @ VDD = 2.7 V, Pin 7 LNA Ctrl = 0 V: LNA"off" Frequency range Pin 4 Linear power gain Pins 4 and 6 Noise figure Pins 4 and 6 Compression Pins 4 and 6 Third-order input intercept Pins 4 and 6 point Isolation Pins 6 and 4 (from output to input) Input impedance Pin 4 Output impedance Pin 6 LNA control voltage LNA Mode "off" Pin 3 LNA Mode "on" Parameters Supply-voltage range Supply current Supply current VLNA Ctrl IsolLNA Symbol VDD Is Is f Gp NF P_1dB IIP3 VDD-0.5 VDD-0.5 Min. 2.9 - 29 - 19 839 50 20 50 100 0.0 VDD Typ. 3.6 3.0 0.5 866 12 2.0 - 28 - 18 25 Max. 5.25 4.0 952 0.5 2.5 MHz dB dB dBm dBm Unit V mA mA dB
AAAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA AA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAA A A A A AAA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAA AA A AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Test conditions (unless otherwise specified): VDD = 3.3 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W, fRF = 866 MHz
Rev. A4, 19-May-99
Electrical Characteristics Low Noise Amplifier (LNA)
Test Conditions / Pins Pin 7 @ VDD = 2.9 V, Pin 7 @ VDD = 2.9 V, Pin 7 LNA Ctrl = 0 V: LNA"off" Frequency range Pin 4 Linear power gain Pins 4 and 6 Noise figure Pins 4 and 6 Compression Pins 4 and 6 Third-order input intercept Pins 4 and 6 point Isolation Pins 6 and 4 (from output to input) Input impedance Pin 4 Output impedance Pin 6 LNA control voltage LNA Mode "off" Pin 3 LNA Mode "on"
Parameters Supply-voltage range Supply current Supply current
VLNA Ctrl
IsolLNA
Symbol VDD Is Is
f Gp NF P_1dB IIP3
Min. 2.9
- 29 - 19
839
50
20
50 100 0.0 VDD
Typ. 3.6 3.5 0.5
866 14 2.0 - 27 - 17
25
U7001BG
Max. 5.25 5.0
952
0.5
2.5
MHz dB dB dBm dBm
Unit V mA mA
dB
3 (15)
W W W W
V V
V V
AA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA A A A A AAA AA AAA AA AA AA AA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Input impedance Output impedance Input matching Output matching Power added efficiency Pin 8 Pin 17 VSWRin VSWRout VPA Ctrl VPA Ctrl VPA Ctrl IsolPA
AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA AAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Test conditions (unless otherwise specified); VDD = 5.0 V, PA Ctrl = 5 V, Tamb = 25C, referred to test circuit. System Impedance Zo = 50 W; fRF = 866 MHz
Electrical Characteristics Power Amplifier
U7001BG
4 (15) Gain control range Gain control voltage Gain control voltage Gain control voltage Switching time Turn-on time Turn-off time Harmonic levels Isolation Parameters Supply-voltage range Supply current Supply current Frequency range Linear power gain Power response Output power Test Conditions / Pins Pins 14 and 16 Pins 14 and 16 Pin 12 Pin 8 Pins 8 and 17 @ Pin = - 14 dBm At 3 dB gain compression; Pin 17 Pins 17 and 12 Pout = Poutmax Pout = Poutmax - 16 dB Pout = Poutmin Pins 12 and 17 90% Poutmax 10% Poutmax At 3 dB gain compression Pins 17 and 8 (from output to input) Pin 8 Pin 17 Pin 17 Symbol VDD1,2 Is ICtrl f Gp
hPAE
Zin Zout
Pout
ton toff
Gc
1.9 : 1
Min. 2.7
- 18 42
839 34
30
17
1.6 : 1 2.0 : 1 40
Typ. 3.6 33 5.0 866 36
2 5 - 25 45
33 4.5 1.2 0.0
50 50
18
Rev. A4, 19-May-99 Max. 5.25 40 6.0 952 VDD Unit V mA mA MHz dB dBm dBc dB dB V V V
ms ms
%
W W
AA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA A A A A AAAA A AAAA A AAA A AAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A
Input impedance Output impedance Input matching Output matching Power added efficiency Pin 8 Pin 17 VSWRin VSWRout VPA Ctrl VPA Ctrl VPA Ctrl IsolPA
AAAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAAA A AAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A
Test conditions (unless otherwise specified); VDD = 3.6 V, PA Ctrl = 3.6 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W; fRF = 866 MHz
Rev. A4, 19-May-99
Electrical Characteristics Power Amplifier
Gain control range Gain control voltage Gain control voltage Gain control voltage Switching time Turn-on time Turn-off time Harmonic levels Isolation
Parameters Supply-voltage range Supply current Supply current Frequency range Linear power gain Power response Output power
Test Conditions / Pins Pins 14 and 16 Pins 14 and 16 Pin 12 Pin 8 Pins 8 and 17 @ Pin = - 14 dBm At 3 dB gain compression; Pin 17 Pins 17 and 12 Pout = Poutmax Pout = Poutmax - 16 dB Pout = Poutmin Pins 12 and 17 90% Poutmax 10% Poutmax At 3 dB gain compression Pins 17 and 8 (from output to input) Pin 8 Pin 17 Pin 17
Symbol VDD1,2 Is ICtrl f Gp
hPAE
Zin Zout
Pout
ton toff
Gc
1.9 : 1
Min. 2.7
- 18 42
839 32
30
15
1.6 : 1 2.0 : 1 45
Typ. 3.6 30 5.0 866 35
2 5 - 25 45
33 2.9 1.2 0.0
50 50
17
U7001BG
Max. 5.25 36 6.0 952
VDD
Unit V mA mA MHz dB
dBm
dBc dB
5 (15) dB V V V
ms ms
%
W W
AA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA A A A A AAA AA AAA AA AA AA AA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Input matching Output matching Power added efficiency Input impedance Output impedance VSWRin VSWRout VPA Ctrl VPA Ctrl VPA Ctrl IsolPA
AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA AAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Test conditions (unless otherwise specified); VDD = 2.7 V, PA Ctrl = 2.7 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W; fRF = 866 MHz
Electrical Characteristics Power Amplifier
U7001BG
6 (15) Gain control range Gain control voltage Gain control voltage Gain control voltage Switching time Turn-on time Turn-off time Harmonic levels Isolation Parameters Supply-voltage range Supply current Supply current Frequency range Linear power gain Power response Output power Test Conditions / Pins Pins 14 and 16 Pins 14 and 16 Pin 12 Pin 8 Pins 8 and 17 @ Pin = -15 dBm At 3 dB gain compression; Pin 17 Pins 17 and 12 Pout = Poutmax Pout = Poutmax - 16 dB Pout = Poutmin Pins 12 and 17 90% Poutmax 10% Poutmax At 3 dB gain compression Pins 16 and 8 (from output to input) Pin 8 Pin 16 Pin 16 Pin 8 Pin 16 Symbol VDD1,2 Is ICtrl f Gp
hPAE
Zin Zout
Pout
ton toff
Gc
1.9 : 1
Min. 2.7
- 20 42
839 30
30
12
1.4 : 1 2.0 : 1 35 50 50
Typ. 3.6 25 4.5 866 32
2 5 - 25 45
33 2.7 1.5 0.0
14
Rev. A4, 19-May-99 Max. 5.25 30 5.5 952 VDD Unit V mA mA MHz dB dBm dBc dB dB V V V
ms ms
%
W W
AAAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA AA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAA A A A A AAA AA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAA A A A A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A
Test conditions (unless otherwise specified); VDD = 2.7 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W; fRF = 866 MHz Input impedance Input impedance Output impedance Switch control Isolation Insertion loss Isolation Parameters Supply-voltage range Frequency range Insertion loss Input impedance Input impedance Output impedance Test Conditions / Pins Pin 7 Pins 1, 18 and 20 @ Pin = +14 dBm; Pin 18 to Pin 20; "TX Mode" @ Pin = +14 dBm; Pin 18 to Pin 1; "TX Mode" @ Pin = -26 dBm; Pin 20 to Pin 1; "RX Mode" @ Pin = -26 dBm; Pin 20 to Pin 18; "RX-Mode" RX Mode; Pin 2 TX Mode; Pin 2 TX Mode; Pin 18 RX Mode; Pin 1 RX TX-Mode; Pin 20 VSW Ctrl VSW Ctrl Zin Zin Zout Symbol VDD f ILTX IsolTX IsolTX ILRX 0 VDD -0.5 Min. 2.7 839 15 11 0 VDD 50 50 50 Typ. 3.6 866 1.0 1.0 13 0.05 VDD +0.5 Max. 5.0 952 1.3 1.3 Unit V MHz dB dB dB dB
AAAA AA AAA AA A AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAA AA AAA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAA AA A A AAAAAAAAAAAAAAAAAAAAAAAA AAA AA AAA AA AA AA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A A A AAA AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAA AA A AAA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A A A AAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AA AA AA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AA A
Test conditions (unless otherwise specified); VDD = 3.6 V, Tamb = 25C, referred to test circuit. System impedance Zo = 50 W; fRF = 866 MHz
Rev. A4, 19-May-99 Switch control Isolation Insertion loss Isolation
Electrical Characteristics Antenna Switch
Parameters Supply voltage range Frequency range Insertion loss
Test Conditions / Pins Pin 7 Pins 1, 18 and 20 @ Pin = +16 dBm; Pin 18 to Pin 20; "TX Mode" @ Pin = +16 dBm; Pin 18 to Pin 1; "TX Mode" @ Pin = -26 dBm; Pin 20 to Pin 1; "RX Mode" @ Pin = -26 dBm; Pin 20 to Pin 18; "RX Mode" RX Mode; Pin 2 TX Mode TX Mode; Pin 18 RX Mode; Pin 1 RX TX-Mode; Pin 20
VSW Ctrl VSW Ctrl Zin Zin Zout
Symbol VDD f ILTX
IsolTX
IsolTX
ILRX
0 VDD -0.5
Min. 2.7 839
16
12
0 VDD 50 50 50
Typ. 3.6 866 1.0
1.0
18
15
U7001BG
0.05 VDD +0.5
Max. 5.0 952 1.3
1.3
Unit V MHz dB
7 (15) dB dB dB
W W W W W W
V V V V
U7001BG
94 8838
Figure 3. Gain variation of power amplifier with switch and filter. @ VDD = 3.6 V (typical values)
TX
PA
Antenna
Switch
LNA
U7001BG RX
94 8837
Figure 4. Application 1
8 (15)
Rev. A4, 19-May-99
U7001BG
TX
PA
Switch
LNA
Antenna U7001BG
RX
94 8836
Figure 5. Application 2
+VDD
100 pF
100 pF SWITCH Ctrl
PA Ctrl
10 nH
12 nH
PA In
12
14
16
17
18
2
8 VDD LNA/SW LNA Ctrl 3 LNA Out 15 nH 6 100 pF 7
PA
Antenna SW
Switch
20
LNA
4 1 5,9,10,11,13,15,19 GND 18 nH 1.5 pF
95 9946
Figure 6. Application for minimal component count
Rev. A4, 19-May-99
9 (15)
U7001BG
45 40 35 Gain ( dB ) 30 PAE ( % ) 25 20 15 10 5 0 -30
14238
20 10 0 -10 -20 -30 -40 -50 -25 -20 -15 -10 -5 0
14240
f = 866 MHz VDD = 3.6 V VCtrl = 3.6 V Tamb = 25C
0
0.5
1.0
1.5
2.0
2.5
3.0
PIN ( dBm )
LNACtrl ( V )
Figure 7. PAE versus PIN
20
Figure 9. LNA gain versus control voltage
15 POUT ( dBm )
10
f = 866 MHz VDD = 3.6 V VCtrl = 3.6 V Tamb = 25C
5
0 -40 -35 -30 -25 -20 -15 -10
14239
-5
0
PIN ( dBm )
Figure 8. POUT versus PIN
14249
Figure 10. Power amplifier - circuit topology
10 (15)
Rev. A4, 19-May-99
U7001BG
Start: 0.045 GHz Stop: 2.045 GHz
Port 1: SW Ant Port 2: SW TX
VDD = VCtrl = 3.3 V
Marker 2: f = 910 MHz
14241
Figure 11. Switch TX insertion loss
Start: 0.045 GHz Stop: 2.045 GHz
Port 1: SW RX Port 2: SW Ant
VDD = VCtrl = 3.3 V
Marker 2: f = 910 MHz
14242
Figure 12. Switch RX insertion loss
Rev. A4, 19-May-99
11 (15)
U7001BG
2: 915 MHz: 32.5 W - 188 W
2: 915 MHz: 61.8 W - 168 W
Start: 0.045 GHz Stop: 2.045 GHz
VDD = VCtrl = 3.0 V
14244
Figure 13. LNA without matching
VDD
15 nH
LNAIN
15 nH 5.6 pF
15 nH LNAOUT
LNA with matching
Start: 0.045 GHz Stop: 2.045 GHz
Port 1: SW RX Port 2: SW Ant
VDD = VCtrl = 3.3 V
14243
Figure 14. LNA with external matching
12 (15)
Rev. A4, 19-May-99
U7001BG
14246 14245
Figure 15. Switch Ant - TX isolation VDD = 3.0 V, VCtrl = 0 V
Figure 16. Switch Ant - RX isolation VDD = 3.0 V, VCtrl = 3.0 V
SW RX - Ant insertion loss
VDD = 3.0 V
VCtrl = 0 V
14247
Figure 17. Matched on both sides
Rev. A4, 19-May-99
13 (15)
U7001BG
14248
Figure 18. LNA switched off, VDD = 3.0 V
Package Information
Package SSO20
Dimensions in mm
6.75 6.50 5.7 5.3 4.5 4.3
1.30 0.25 0.65 5.85 20 11 0.15 0.05 0.15 6.6 6.3
technical drawings according to DIN specifications 13007
1
10
14 (15)
Rev. A4, 19-May-99
U7001BG
Ozone Depleting Substances Policy Statement
It is the policy of TEMIC Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs). The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. TEMIC Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify TEMIC Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2594, Fax number: 49 ( 0 ) 7131 67 2423
Rev. A4, 19-May-99
15 (15)

▲Up To Search▲

Price & Availability of U7001BG

	To Download U7001BG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .